Carefully remove the needle and wipe clean with cleaning solution and a paper towel. Look for any bending on the tip of the needle, then set aside

Unscrew the spring guide and set aside

Remove the spring and set aside

Carefully remove the needle chucking guide (with auxiliary lever) and set aside

Lift up the trigger and set aside

Remove auxiliary level.

Remove the color cup from the side of the airbrush

Remove the plug on the opposite side the color cup

Use the cleaning brush to clean the inside, then rinse

Use the cleaning brush to clean the inside, then rinse

Unscrew the Needle cap then set aside

Unscrew the Nozzle cap

Carefully unscrew the Fluid Nozzle with your fingers. You may also need the use of the provided Spanner wrench to tighten or loosen the nozzle.

Unscrew the Air cap

Use the cleaning brush to clean the air cap, then rinse

Use the cleaning brush and airbrush cleaner to clean the inside of the Main body of the airbrush, then rinse

For reassembling your airbrush, start by screwing on the Head system base or Air cap

Carefully screw on the Fluid Nozzle with your fingers. You may also need the use of the provided Spanner wrench

Screw on the Nozzle cap

Screw on the Needle cap

Replace the plug on the opposite side the color cup

Replace the color cup

Carefully replace the auxiliary level

Replace the trigger

Carefully replace the needle